Setting The Built-In Parallel And Serial Port Options - Epson Progression 4 Setup Manual

Setting the Built-in Parallel and Serial Port Options

There are two sets of options you can use to control the
operation of your built-in parallel and serial ports: the primary
port options and the I/O address options. The primary port
options are listed under the
address options are listed under the port Configuration
heading. The table below lists the options and their available
settings.
Primary parallel port VT11
Secondary serial port (COM2)
Default setting
l
The default setting for the parallel port and both serial ports is
Enabled.
the parallel port, and COM1, the first serial port.
If you are using only the two primary ports, you do not need to
change any settings.
The default I/O address setting is primary for LPT1,
Ports heading and the I/O
/
I O
Enabled ' and Disabled
Enabled ' and Disabled
Enabled and Disabled
l
l . 378h - LPl2.278h - LFT3
l
COM 1 , 2F8h - COM2,
Running the SETUP Program 2-13