Table of Contents
Advertisement
This manual explains how to set up your Epson
Chapter 1 provides simple instructions for setting up your
system and connecting peripheral devices such as the monitor,
mouse, and printer.
Chapter 2 describes how to run the SETUP program to define
your computer's configuration. Do this before you use your
computer. If you change the configuration later, you will need
to run it again.
After you set up your system and run SETUP, you can install
your operating system and software. (For general installation
guidelines, see the Read This First card that came with your
computer.)
For information on using system memory, see Appendix A.
N o t e
If your computer has already been configured, you don't
need to run SETUP
described in Chapter 1 and turn it on.
For complete information about using your computer, see the
User's Guide.
or install any software. Just set it up as
®
computer.
Introduction 1
Advertisement
Table of Contents
