Epson Progression 4 Setup Manual page 44

7. You see the prompt
password and press m The Password option setting
changes to set.
Be sure to remember the password you enter or write it
down and keep it in a safe place. If you forget your
password, you will not be able to use the computer the
next time you turn it on. See "Password Problems" in
Chapter 6 of the User's Guide for more information.
8. If you will be using your computer as a network server and
want to set your password to operate in a special network
security mode, highlight Network server mode and
p r e s s Mr Thenpress~or~tochangethesetting
Computer as a NetworkServer" in Chapter 1 of the
User's Guide for information about network server mode.)
After you set a password, you can change or delete it, if
necessary, when you are using the SETUP program or when
you are entering the password to access your computer.
Follow the steps in the appropriate section below to change or
delete an existing password in SETUP. See Chapter 1 of the
User's Guide for instructions on entering, changing, and
deleting your password as you access your computer.
Enter Password
Running the SETUP Program
Again. Type your
2-17