Setting the Non-cache Areas
Your computer automatically caches all of your system
memory except for four of the system defined non-cache
address areas listed in the table below. You can enable or
disable caching in any of six, System
control
Non-cached Areas (also listed in the table).
Non-cache address areas
Option
System defined areas
1st User dellned norkcache low
address
1st User denned norwxcllehlgh
address
2nd User defined nm-cachelow
address
2nd User deilned non-cache hl#~
.
If you set any user-defined non-cache areas, SETUP automatically sets me
high address at least 4KB higher man me corresponding low
2-24
Running the SETUP Program
areas and also set two additional
Defined
User Defined
Default setting
Disabled
Enabled
Enabled
Cache
address.