Asf Sensor Removal - Epson Stylus Color 980 Service Manual

EPSON Stylus Color 980

4.2.7.6 ASF Sensor Removal

1. Remove the ASF unit. (See Section 4.2.7.5.)
2. Viewing the ASF unit from the front, remove the E-ring (left) fixed at
the left end of the shaft.
Figure 4-34. Left E-ring Removal
3. Release the hook securing the detection wheel and push the
detection wheel to remove.
Figure 4-35. Detection Wheel Removal
Disassembly and Assembly
4. Disconnect the connector from the ASF sensor.
5. Using tweezers, release two of the hooks securing the ASF sensor,
and remove the ASF sensor.
Disassembly Procedures
Figure 4-36. ASF Sensor Removal
Revision A
120