Head Id Retrieval; Head Angular Adjustment - Epson Stylus Color 980 Service Manual

EPSON Stylus Color 980
8. Click "OK".
9. When the program submit the ID you type, following screen
appears.
Figure 5-6. Head ID Input Screen
10. Though the head ID inscribed on the printhead when you proceed
head ID retrieval, select the "Previous" and refer the next section
(5.2.3).
Adjustment

5.2.3 Head ID Retrieval

The section describes the procedure for head ID retrieval.
This operation enables you to confirmation the head ID without
defecting ink cartridge.
NOTE:
Though the sticker on the printhead indicates 22-digit of head ID, this
function shows only 21-digit. The 22nd digit is the printhead management
sign and there is no relation to EEPROM. So it is not regarded in case of
retrieval and input.
1. Perform the operation of Head Actuator Voltage Input (5.2.2) 1-3.
2. Select "Check head ID".
3. Click "OK".
4. The following screen appears.
Figure 5-7. Check head ID screen

5.2.4 Head Angular Adjustment

TBD
Adjustments
Revision A
136