Pg Adjust Lever Setting; Paper Select Lever Setting - Epson Stylus COLOR 300 Service Manual

1.2.6 PG Adjust Lever Setting

The paper-gap (PG); a space between the printhead nozzle surface annd the paper
surface, can be adjusted to the appropriate level by the PG adjust lever which located
underneath the printer cover.
Paper Type
Cut Sheet
Envelope

1.2.7 Paper Select Lever Setting

The built-in ASF is equipped with the adjust lever and the position of lever should be set to
appropriate position according to the type of paper used for the printing.
Paper Feeding
Source
ASF
Manual
Insertion
Paper Thickness Lever (Locate underneath the printer cover)
(Forward position:
Backward position: "+" Envelopes)
Figure 1-3. PG Adjust Lever and Paper Select Lever
Rev. A
Table 1-5. PG Adjust Lever Setting
Lever Position
("0" position)
("+" position)
Table 1-6. Paper Select Lever Setting
Select Cut Sheet
Lever
Position
Thick
Normal
Thick
Normal
"0" Normal
Chapter 1 Product Descriptions
Gap Setting
Front
Rear
Paper Type
No
OK
OK
No
Paper Thickness Lever
(Forward position:
Backward position: Thick paper)
0 mm
+0.62 mm
Envelope
OK
No
OK
No
Normal
1-7