Checking The Nominal Voltage Of The Vacuum Device (Optional Equipment); Direction Of Rotation Of The Sewing Motor - Duerkopp Adler 745-34 Installation Instructions Manual
Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners working methods: a, b, d, f
Hide thumbs
Also See for 745-34:
- Operating instructions and replacement parts manual (92 pages) ,
- Service instructions manual (156 pages) ,
- Spare parts (167 pages)
Table of Contents
Advertisement
5.5 Checking the nominal voltage of the vacuum device (optional equipment)
5.6 Direction of rotation of the sewing motor
18
1
The adaptation to the local mains voltage has to be done at the
terminal strip in control box 1.
–
Screw off the cover of control box 1.
–
Check the arrangement of the connections to the terminal strip.
(see circuit diagram, sheet 1).
–
If necessary, change the connections according to the local mains
voltage.
–
Put the cover on the control box 1 again and screw on.
The sewing unit is equipped with the latest step motor technology. A
check of the direction of rotation is not required because it is
automatically set by the control.
Advertisement
Table of Contents
