4.4 Fastening the holder for control panel, bobbin winder and right-hand tray
6
5
4
3
2
Control panel
–
Fasten angle 6 and control panel 5 to bolt 3 with nut 4.
–
Fasten cable 1 to bolt 3 with screw 2.
Bobbin winder and tray
–
Push holder 11 with angle 10 onto the table top and tighten with the
screw.
–
Align the arms 9 and 12.
–
Fasten the tray 8 to the lower arm.
–
Fasten the bobbin winder 7 to the upper arm.
See chapter 5.2 for connecting the bobbin winder.
12
1
11
10
9
8
7
11