Workpiece Boxes - Duerkopp Adler 745-34 Installation Instructions Manual
Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners working methods: a, b, d, f
Hide thumbs
Also See for 745-34:
- Operating instructions and replacement parts manual (92 pages) ,
- Service instructions manual (156 pages) ,
- Spare parts (167 pages)
Table of Contents
Advertisement
4.3 Workpiece boxes
10
4
3
–
Fasten the workpiece boxes onto rod 2.
For this purpose push the clamping pieces 4 and 3 on rod 2, align
the height and clamp them firmly by tightening the screws.
–
Loosen the screw at clamping lever 1 and align the workpiece
boxes to the sewing station.
–
Tighten the screw at clamping lever 1.
2
1
Advertisement
Table of Contents
