Disassembly and Assemb(y
3.2.2 Removal of the Controller Section
The
control section is comprised of the main board (C144 MAIN).
3.2.2.1 Main Board (C144 MAIN Board) Removal
Remove the panel cover, paper tray, front @ver interface cover~ and 'if!$t 'Ver. (Refir b
1.
Section 3.2.1.1)
2 . Dismnn ect all 5 connectors on the main board.
3. Remove the 8 CC screws (M3 x 6) that secure the shield case on the right side of the printer.
4. Remove the shield case with main board.
5. Remove the3 CP screws (M3 x 6) that secure the interface shield plate on the shield case.
6. Remove the 3 CP screws (M3 x 6), and main board with interface shield plate.
7. Remove the2 screws, and interface shield plate.
3-6
Figure 3-3. Removing the Shield Caae
Figure 3-4. Removing the Main Board
- . . :
Rev. A