8.7.2
Mechanical adjustment of thread tensions
52
4
3
–
Loosen counter nut 2.
–
Select "Kali.3" in the submenu "Thread tension".
–
Turn the disc 3 until the tension discs are positioned one in front of
the other.
–
Counter the nut 2 slightly.
–
Deactivate "Kali.3".
–
Screw the screw 1 in until the tension discs open.
(When selecting "Kali.1" the tension must tighten again).
–
Open the thread tension with the "OK" key.
The thread tension must open with slight pressure so that the
thickest thread to be processed can be pulled between the tension
discs unhindered.
–
Close the thread tension again with the "OK" key and check
whether the thread tension is completely closed again.
2
1