30
Entering the contour
1) Entering lines (not sewing)
(Example: program location 4)
–
Select the menu item "Line" with the keys "ñ " or "ò ".
–
Press the "OK" key.
The following screen appears.
–
Select the option "not sewing" with the key "ò ".
The seam course to be entered is not sewn.
–
Press the "OK" key.
The following screen appears.
With the keys "ï", "ð ", "ñ " and "ò " the individual sections of the
seam contour are fixed in steps of 0.5 mm.
By stepping the pedal forward and with the keys "ï", "ð ", "ñ " and
"ò " the individual seam sections can be fixed in steps of 1.0 mm.