Threading The Needle Thread - DURKOPP ADLER 745-34-2 Operating Instructions Manual

2.5

Threading the needle thread

Caution: Danger of injury!
Switch the main switch off.
Thread the needle threads only with the sewing unit switched off.
The threading of the needle threads is done in ascending numerical
order as shown in the illustrations opposite.
–
Swing the folding station aside
Left needle
–
Put the thread reel on the thread reel holder.
–
Thread the thread from the thread reel through the drill-hole 1 of
the thread reel holder.
–
Guide the thread through guide 2.
–
Guide the thread through the drill-hole in the support plate 3.
–
Guide the thread through guide 5.
–
Guide the thread through the tension discs of the needle thread
tension 6.
–
Guide the thread through the thread controller spring 8.
–
Guide the thread through the upper drill-hole in the support plate 10.
–
Thread the thread through the upper drill-hole in the thread lever 17.
–
Guide the thread downward through the thread puller 16.
–
Thread the thread through guide 15 and the needle thread monitor 14.
–
Thread the thread through guide 12, through the drill-hole in the
needle holder and through the eye of the needle.
Right needle
–
Put the thread reel on the thread reel holder.
–
Thread the thread from the thread reel through the drill-hole 1 of the
thread reel holder.
–
Guide the thread through guide 2.
–
Guide the thread through the drill-hole in the support plate 3.
–
Guide the thread through the tension disc of the needle
thread tension 4.
–
Guide the thread through the guides 5 and 7.
–
Guide the thread through the thread controller spring 9.
–
Guide the thread through the lower drill-hole in the support plate 10.
–
Thread the thread through the lower drill-hole in the thread lever 17.
–
Thread the thread downward through the thread puller 16, through
guide 15 and through the needle thread monitor 11.
–
Thread the thread through guide 12, through the drill-hole in the
needle holder and through the eye of the needle.
–
Clamp the thread in the needle thread catcher and cut it off
1
19