Cylinder For Pick-Up Folder Stroke - DURKOPP ADLER 745-34-2 Installation Instructions Manual

4.2 Cylinder for pick-up folder stroke (745-34-2 B/F)
3 2
–
Remove the securing device and swivel the cylinder upwards.
–
Fasten the cylinder fixture 1 to plate 3 with screws 4.
–
Move the fixture for the pick-up folder by hand.
The movement must be fingertip easy over the whole cylinder
stroke.
Correction
–
Loosen screws 3 a little and move the fixture for the pick-up folder
over the whole cylinder stroke.
In the course of this the cylinder fixture aligns itself.
–
Tighten screws 3.
–
Check the free movement once again.
1
2
9