Checking The Nominal Voltage Of The Vacuum Device (Optional Equipment); Direction Of Rotation Of The Sewing Motor And The Vacuum Blower - DURKOPP ADLER 745-34-2 Installation Instructions Manual

Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners

Hide thumbs Also See for 745-34-2:

Table of Contents

5.4

Checking the nominal voltage of the vacuum device (optional equipment)

Legend:

5.5

The adaptation to the local mains voltage has to be done at the

terminal strip in control box 1.

–

Screw off the cover of control box 1.

–

Check the arrangement of the connections to the terminal strip.

(see circuit diagram).

–

If necessary, change the connections according to the local mains

voltage.

–

Put the cover on the control box 1 again and screw on.

bl= blue

sw= black

The sewing unit is equipped with the latest step motor technology.

•

A check of the direction of rotation of the sewing motors is not

required because it is automatically set by the control.

The direction of rotation of the vacuum blower can be inverted by

•

exchanging the phase (plug).

bn= brown

gn-ge= green, yellow

Table of Contents