12.5.2 Aligning the pick-up folder height with the folder
Fig. 123: Aligning the pick-up folder height with the folder
(1) - Threaded pin
Proper setting
The height of the pick-up folder is set in such a way that - when the pick-up
folder is lowered - both soles are flush at the connecting surface.
To align the pick-up folder height with the folder:
1. Turn the threaded pin (1).
2. Check if both soles are flush at the connecting surface (2).
3. Readjust if necessary.
140
To do so, look at the soles from the side.
(2) - Connecting surface
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
Folder
①
②