Aligning The Folder With The Pick-Up Plate - DURKOPP ADLER beisler 2112-5 Service Instructions Manual

7.4.2 Aligning the folder with the pick-up plate

Proper setting
To ensure that the folder can pick up the pocket facing evenly, the folder
must lie evenly on the pick-up plate along its entire length when it is
lowered.
Fig. 16: Aligning the folder with the pick-up plate
(1) - Folder
(2) - Screws
(3) - Screws
(4) - Bracket
To align the folder with the pick-up plate:
1. To fix the pick-up plate (7) in place, turn the adjusting wheel (6) all
2. Move the folder (1) onto the pick-up plate (7).
3. Loosen the screws (3) on the bottom side of the worktable.
4. Rotate the bracket (4) at the holder (5).
 The inclination of the pick-up plate (7) is such that the folder (1) lies
5. Tighten the screws (3).
28
①
②
the way into the minus range.
To do so, use the input/output control functions
• Move the folder to the right
• Lower the folder
evenly on the pick-up plate (7).
Setting up the machine
③
(5) - Holder
(6) - Adjusting wheel
(7) - Pick-up plate
(8) - Folder rail
Service Instructions 2112-5 - 00.0 - 02/2020
⑧
⑦
⑥
⑤
④