DURKOPP ADLER 768 Setting Instructions Manual page 39

Fitting the sewing-light transformer
Power for the sewing lamps is supplied by the sewing-light transformer which is
available as ancillary equipment (order no. 0798 500088).
–
Attach the sewing-light transformer 2 beneath the table plate with chipboard
screws 1.
–
Attach the connection cable beneath the table plate with cable ties.
Connecting the sewing lamp
–
Stick the adhesive label 3 with safety warning to the front of the main switch.
–
Pass the sewing-lamp connection cable behind the guard on the sewing-machine
arm.
–
Pass the connection cable down through the cable-holders on the pillar.
–
Pass the connection cable down through hole 4 in the table plate.
–
Plug the cable into the sewing-light transformer.
CAUTION!
Turning off the main switch does not turn off the power
supply to the sewing lamp.
GB
39