Advertisement
TRITON Rack EasyStart
!
More on the Arpeggiator functions, including editing and recording/sync applications in the TRITON Rack Owner's manual
and TRITON USER GUIDE (korg.com).
The Effects
5 stereo insert and 2 master effects plus 3-band EQ for every Program, Combi and Multi, select from 102 available effects
including dynamic modulation, plus many syncable effects.
In COMBI mode, select Combination INT-A 001 Lonely Moon press MENU key (below DIAL) press F7 key until IFX
1.
is highlighted in display
Press MENU key press F7 key until MFX is highlighted in display
2.
and 3-band EQ press EXIT key (left of MENU key).
!
Editing pages for insert and master effects are accessed by pressing F-keys below desired effect tabs in the display. More
on effect routing and editing in the TRITON Rack Owner's Manual and TRITON USER GUIDE (korg.com).
!
REALTIME CONTROL knobs 3 and 4 are set to control insert (3) and master (4) effect wet/dry balance for most Programs
and Combis selected. Try this when working with the Audition Riff function in Program mode.
!
Up to 5 stereo insert effects are available in SAMPLING mode, so that you can sample through the insert effects. Once the
multisample is converted to a Program, additional insert effects can then be used in the new Program if desired.
Sampling Overview
16 Mbyte sample memory, expandable to 96 MB with SIMM modules (3 slots); 48k/16 bit linear mono and stereo sampling-
up to 1000 multisamples/4000 samples; compatible with AIFF, WAVE, AKAI S1000/3000, Korg sample formats
Additional Features:
Sampling time: Fully expanded, the TRITON-Rack allows for up to 17 minutes/28 seconds of sampling time.
Visual Waveform Editing: TouchView display makes viewing and editing sample data easy! Zoom in and out; quickly-set loop
editing points; use the Grid display based on BPM tempo values, etc.
Time Slice: Detects attack impulses of sample and cuts up into smaller elements – useful for dividing up a rhythm loop to
change tempo without affecting pitch and visa versa. Source BPM (beats per measure) of the sample data can be manually or
automatically.
Crossfade Loop: Smooths out irregularities in long loops – useful for reducing clicks and pops that may occur at the loop point.
!
More information on Sampling mode in the TRITON Rack Owner's Manual, TRITON USER GUIDE and TRITON 2.0
Update Guide (korg.com).
press F8 key and overview the five stereo insert effects in this Combination.
press F8 key and overview the two master effects
4
Advertisement
