Panel Overview Of The D16; Top Panel - Korg D16 Owner's Manual

Panel overview of the D16

Top panel

1
2
3
4
* For the mic and trim controls etc., refer to the "Front panel" section.
1 LCD screen
The D16 uses a TouchView system based on a
touch panel screen. By pressing objects that are
shown in the LCD screen, you can select pages,
tabs, and parameters, and set their values.
During recording/playback, this area displays vol-
ume data (level meters), time data (locator), and
various parameters. ( p.8)
2 [TRACK STATUS] keys
These keys are used to put each track into playback
or record status, or to mute (silence) it. Each time
you press a key, the track setting will alternate
(LED color lit, dark). ( p.86)
When recording from analog/digital input, you
can select up to eight recording tracks.
These settings can be paired.
3 [PAN] knobs (Ch 1...8)
[BALANCE] knobs (Ch 9...16)
These knobs adjust the stereo location of each
channel.
10 9 8 7 6 12
11 16 17
24 25 26
5
For channels 1–8 they adjust the pan of each chan-
nel. For channels 9–16 they adjust the balance.
( p.86)
These settings can be paired, and registered in
a scene.
4 [CHANNEL] faders
(Ch1...8, Ch9/10...15/16)
These faders adjust the recording/playback vol-
ume of each channel.
Channels 9–16 are stereo faders. ( p.86)
These settings can be paired, and registered in
a scene.
5 [MASTER] fader
This fader sets the overall volume of all channels.
When bouncing, it sets the recording level of the
bounce destination tracks. ( p.86)
6 [INPUT] key
This key is used to select the mixer channel to
which the audio signal from each input will be
13 1415
31
32
23
29
30
18
19
20
21
27
22
28
3