Multi Mode; Rppr (Real Time Pattern Play Record) Mode - Korg Triton-Rack Easy Start

Multi Mode

Up to 200 16-part Multis can be created, for use with external sequencers; Triton song (.SNG) data can be loaded as track
templates into Multi mode, including pattern and RPPR data, plus SMF patterns; Songs can be loaded into DEMO/SONG
mode as factory and user song play demos
Press MULTI key (upper-right)
1.
EXIT key.
In the same way as Effects section above, select and overview the insert and master effects / EQ pages for the selected
2.
Multi.
!
Multis created can be saved and loaded as Template Multis (16 user) for quick access when creating external sequences
in various musical applications, including specialized effect routing setups!
!
Combinations and insert / master effects can be easily copied from internal memory into a Multi. See the TRITON Rack
Owner's Manual for more information.

RPPR (Real Time Pattern Play Record) Mode

Assign patterns to each note of a controller keyboard and trigger in real time, record 1 RPPR set per Multi; 150 preset
patterns, 100 user patterns; approximately 140,000 note internal memory in Multi
Press DISK key
1.
page of this guide).
Press MULTI key
2.
"T01:Drums 1" and "RPPR" box (upper-right) is checked, and that controller is set to transmit on MIDI channel 1.
Play notes above C#2 on controller to trigger patterns assigned to this RPPR set. Note that pressing a note (C1 – C2) will
3.
stop pattern playback (Shutdown keys).
!
Up to 72 patterns (preset and/or user) can be assigned across the controller keyboard. Notes where patterns are not
assigned will play normally. For instance, you could assign RPPR drum and bass patterns to the lower range, and play live
organ/lead sounds in the upper range.
!
Create new samples, time slice, create a pattern, and then assign to an RPPR set!
!
For more information see the TRITON Rack Owner's Manual and the TRITON USER GUIDE (korg.com).
press F2 – F5 keys to overview Program and Mix parameters for timbres 1-16
load "RPPRDEMO.SNG" from the TRITON-Rack TNRFD-00P disk (disk load procedure is on the back
make sure that "000: FEVER" is selected as the Multi make sure that "Control Track" is set to
5
TRITON Rack EasyStart
press