Casio DT-800RF Supported Equipment Manual page 52

Error Message Resolution Guide
Message
Domain Name Server\nNot Set;
Domain Name Server\nQuery Memory
Error;
Domain Name Server\nQuery Sending
Error;
Domain Name Server\nQuery Receive
Error;
Domain Name Server\nUnavailable;
Error loading\nparameter file;
Could not open\ntelnet interface;
Could not set\mtelnet options;
Setup file\nsetting mismatch\nReload
Setup;
4-12
Reason
DOMAIN NAME SERVER not
configured.
Memory error on the Mobile Unit
Mobile Unit out of the coverage
area.
Mobile Unit out of the coverage
area.
Could not connect to the DOMAIN
NAME SERVER.
Could not load the parameter file.
Could not telnet.
Could not use the telnet
configuration.
Emulation program selected is not
compatible with the configuration
file on the Mobile Unit.
Solution
Configure the Mobile Unit with the correct
network IP information.
Expand the Mobile Unit memory or return
the Mobile Unit for repair.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Reload the correct configuration files.
Reload the program files.
Reload the correct configuration files.
Remove the emulation and configuration
files. Run clear Telnet on the Mobile Unit
then reload the Mobile Unit with the proper
emulation and configuration files.
Supported Equipment Manual
Reference Tech Note
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
---
---
---
• March, 2006