In addition to providing functions for the download of files to the terminal via the
traditional serial connection, the Twin Client Manager also provides for the management
of terminal software and configurations automatically over the wireless network.
This section entitled Software Management describes the automated capability in detail.
Additional manual operations involving serial download options are described at the end
of this section.
The Auto-Configuration form is accessed from the Twin Client Manager
If no options are displayed, click the Advanced<< button.
Enabling Automatic Downloads
Click to put a check in the box that allows terminal to be automatically configured via RF
to enable automatic downloading. In the event another PC on the network is already
configured and active, the following warning message is displayed.
Supported Equipment Manual
• March, 2006