Standard Setup; Setup Using Twin Client Manager - Casio DT-800RF Supported Equipment Manual

Terminal Setup

Standard Setup

The default terminal setup is sufficient for most installations. However, to meet site-
specific requirements, it may be necessary to customize terminal operation. The standard
setup options simplify this process and can be modified using one of the following
methods:
•
Using the Twin Client Manager.
•
Using the Twin Client terminal menu system.
Standard Setup describes how to use the Twin Client Manager and the terminal menu
systems to set up the terminal. Also described are the methods for authorizing the
terminal software.

Setup Using Twin Client Manager

The Twin Client Manager provides a
terminals. The options within this tab vary according to the emulation selected, each of
which is described below.
VT Settings
Select the VT emulation setup by clicking on the
menu, as shown below.
Then click on the
Click on
menu. The standard settings tab will now reflect the settings for VT emulation.
2-12
or
VT100 VT220
after the selection is made, and return to the main Twin Client Manager
OK
tab for automatic setup of the
Standard Settings
Settings
selection, as shown below.
Supported Equipment Manual
menu and then the
Emulation
• March, 2006