Casio DT-800RF Supported Equipment Manual page 43

Message
Connection ERROR.\nREBOOT
MOBILE UNIT;
Disconnect ERROR.\nREBOOT
MOBILE UNIT;
RF Send ERROR.\nREBOOT MOBILE
UNIT;
RF Receive ERROR.\nREBOOT
MOBILE UNIT;
RF Check ERROR.\nREBOOT
MOBILE UNIT;
RF Timeout ERROR.\nREBOOT
MOBILE UNIT;
REBOOT MOBILE UNIT;
Retry (Y/N)?;
•
Supported Equipment Manual March, 2006
Reason
Could not Connect.
Could not Disconnect.
Could not Send.
Could not Receive.
Could not run the RF Survey.
Have been trying to contact the
host for the radio timeout period (2
minutes default).
Reboot the Mobile Unit do to loss
of connection.
Try again.
Solution
Verify that your Network settings are correct
and you are in the correct mode using the
correct Port.
Verify that your Network settings are correct
and you are in the correct mode using the
correct Port.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Try to send or receive again, or perhaps
ensure that the printer is cabled to the
Mobile Unit and is on.
Error Message Resolution Guide
Reference Tech Note
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
4-3