Setting the Segment
button restricts a terminal group to a range of IP addresses. The
IP Address can be any valid address on the segment, as it is used only to identify the
segment. The setting of the Net Mask can be used to restrict the range. This feature is
useful for segregating terminal groups by location.
Setting Force Reload
Clicking on the
button forces all terminals within a group to be
automatically updated. The following warning message appears.
Click on the
button to force the reload.
Setting the Default Terminal Group
New terminals that have not yet been assigned to any group are initially assigned to the
default group in effect when they are command booted.
Supported Equipment Manual