Casio DT-800RF Supported Equipment Manual page 44

Error Message Resolution Guide
Message
TIMEOUT\n\nSending Data;
TIMEOUT\n\nReceiving Data;
Host Received Data\nAwaiting App
Reply!;
* WAITING TO SEND *;
TCP Error Reading\nMAC
Address.\nREBOOT MOBILE UNIT;
Invalid TIP Command;
Session Ended\nBy User or Host;
Server Packet Error;
4-4
Reason
Mobile Unit out of the coverage
area.
Mobile Unit out of the coverage
area.
Mobile Unit has sent and received
an acknowledgement from the IP
stack and is waiting for the
application to return data.
Mobile Unit out of the coverage
area.
Could not obtain the Mac Address
from the Mobile Unit.
Bad internal protocol.
User, Host, application or network
has ended the session.
Bad Protocol detected.
Solution
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a host or network issue.
Troubleshoot the customer's environment.
Probable causes are Database record
locking, application program failure, Host
failure or network failure.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Possible hardware, driver or stack problem
Contact the Mobile Unit manufacturer.
Notify Connect over the WEB incident
reporting system.
If the user did not end the session, most
likely host or network issues. Troubleshoot
the customer's environment.
Usually a result of bad cabling, power or
faulty transceiver. Also, will receive this if
the Mobile Unit is in the wrong mode for
server operation.
Supported Equipment Manual
Reference Tech Note
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
• March, 2006