Screen Display; Osd Display - Panasonic AG-HPD24PJ Operating Instructions Manual

Formats, time codes and modes are indicated by abbreviations in playback and recording screens.
◆ NOTE:
• Use the SETUP - DISPLAY - OSD GRADE menu setting to display all (All)/display 1) to 6) only (MODE&TC).
Use the SETUP - DISPLAY - OSD TC SELECT menu setting to switch MODE&TC settings.
• Use the SETUP - DISPLAY - OSD OUTPUT menu setting to switch destination of displayed output.
• The figure below displays their location on the LCD. Other output destinations depend on format and appear in the center of the display.
10)
11)
1)
Time codes and other displayed information
CTL Relative location from the beginning
TCR Recorded time code data
TCR. Time code data recorded in the VAUX area
UBR Recorded user bit data
UBR. User bit data recorded in the VAUX area
TCG Time code data of the time code generator
UBG User bit data of the time code generator
TIME Time information recorded in the subcode
DATE Date information recorded in the subcode
◆ NOTE:
• "T R" or "U R" appears when card data could not be properly
read.
• " " is displayed after the frame in the 2nd and 4th fields.
• In drop-frame mode, a period "." is used instead of a colon ":"
after seconds.
44
Screen Display: OSD Display

Screen Display

OSD Display

9)
1)
4)
6)
2)
Remaining card capacity and total capacity
Remaining card capacity (available recording time) and
total card capacity is displayed in minutes.
◆ NOTE:
• 600 minutes and longer time periods are displayed in hours
with an "h" appended after the number.
• When remaining time and card length information is not
defined, the time indication is blank.
• Time exceeding 99 hours is indicated as 99 h.
3)
Operating status display
Indicates current deck status.
4)
Clip no.
Indicates the clip number of displayed thumbnail.
5)
Compression format indication
Indicates the compression format during recording or
recording standby.
Indicates the compression format of played clips during
playback.
Indicates also the quantization bit depth of audio during
operation in the AVC-Intra (AVC-I) codec.
7)
8)
12)
2)
3)
5)