Playback From The Playback Screen (Thumbnail Screen Off) - Panasonic AG-HPD24PJ Operating Instructions Manual

stopping, select the clips to be paired on the
thumbnail screen and press PLAY or STILL/
PAUSE to synchronize the clips correctly.
Playback from the Playback
Screen (Thumbnail Screen Off)
3
1
Insert P2 cards in both master and slave
units.
2
Press the PLAY or STILL/PAUSE button
on the master unit.
Pressing the button automatically cues the
slave position to the master (matches the clip
numbers and time codes). Pressing PLAY
also starts playback.
◆ NOTE:
• When the first position of the master clip is
earlier than that of the slave, the master is
cued to the first position of the slave.
00:00:00:00
Master clip
Slave clip
Master playback
Slave playback
3
Press the STOP button on the master unit
to stop playback.
50
Synchronous Playback: Playback
2
00:00:01:00
Cuing
◆ NOTE:
• When stopped, no image (black screen) is
displayed.
• Signal output is as follows.
Discrete left and right output method:
Special playback video and video when
left and right signals are invalid (such as
TC mismatch) is displayed only on the
LCD monitor, but is not output as SDI.
However, video is available at the master
unit's SD output when the SETUP - VIDEO
- DISCRETE BLACK menu setting is OFF.
3D single-unit (side-by-side or frame
packing) signal output method:
Special playback video and video when
left and right images are invalid (such as
TC mismatch) appears as both L and R
images on the LCD monitor, but only the L
signal is output (as both L and R images)
to SDI/HDMI.