Panasonic AG-HPD24PJ Operating Instructions Manual page 126

Item
Specifies an operating mode that advances the internal time code
generator.
REC RUN: The internal time code generator is advanced only
during recording.
FREE RUN: When the power is on, the internal time code
RUN MODE
generator is advanced regardless of operating mode.
NOTE:
• When ON is selected in the SETUP - BASIC - VFR REC menu
setting, the time code advances only during recording even
when FREE RUN is selected.
Specifies the time code used when an external time code is used.
EXT LTC: Uses LTC from the TIME CODE IN connector.
EXT TC SEL SLTC (VITC): Uses LTC data attached to serial signal input to
HD SDI IN. When 480i or 576i is set in the SETUP - SYSTEM -
FORMAT menu setting, VTIC data input to SD SDI IN is used.
Sets the DF or NDF mode for CTL and TCG.
DF MODE DF: Uses drop frame mode.
NDF: Uses non-drop frame mode.
Specifies whether or not VITC data will be superimposed on HD
SDI output.
HD EMBD VITC
ON: Superimposes VITC.
OFF: Does not superimpose VITC.
Specifies whether or not LTC data will be superimposed on HD
SDI output.
HD EMBD LTC
ON: Superimposes LTC.
OFF: Does not superimpose LTC.
Switches the phase of time code output from the TIME CODE OUT
connector relative to external LTC input when TCG MODE is set to
TC OUTPUT
EXT. (Only in EE mode)
REF
VOUT: Synchronized with output video signal.
TC IN: Synchronized with the external time code input.
VIDEO
Use this menu to make video settings.
Item
Selects the video input signal.
SDI: Selects the SDI connector.
INPUT SEL INT SG: Selects the internal signal generator. The signal
switches to the internal signal selected using the menu "INT
SG".
Sets the internal signal type. SMPTE and ARIB signals are
available in HD mode only (black in SD mode).
100 %CB: 100% color bar
INT SG 75 %CB: 75% color bar
SMPTE: SMPTE color bar
ARIB: ARIB color bar
BLACK: Black
Settings and brief function description
XX indicates factory default settings.
Settings and brief function description
XX indicates factory default settings.
SYSTEM FREQ
2D
indications
(Main)
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59.94 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
SYSTEM FREQ
2D
indications
(Main)
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
Setup Menu: Menu items
Mode
3D SYNC PB
M M
M M
M M M
M M M
M M M
M M
Mode
3D SYNC PB
M M
M M
63