How To Connect Your Receiver - ViewSat VSPRO User Manual

Digital satellite receiver
Table of Contents

Advertisement

REMOTE CONTROL UNIT
REMOTE CONTROL UNIT
REMOTE CONTROL UNIT
REMOTE CONTROL UNIT
2.3. REMOTE CONTROL UNIT
9

HOW TO CONNECT YOUR RECEIVER

HOW TO CONNECT YOUR RECEIVER
HOW TO CONNECT YOUR RECEIVER
HOW TO CONNECT YOUR RECEIVER
3. HOW TO CONNECT YOUR RECEIVER
Please DO NOT plug in the main power supply cord until you complete all the
connections.
3.1. LOCATION OF THE RECEIVER
Your receiver should be placed under proper ventilation.
Do not place the unit in enclosed cabinets that will restrict the flow of air, resulting
overheating.
The location should be safeguarded from direct sunlight, excess moisture, rough
handling or household pets.
Avoid stacking other electronic components on top of the receiver.
The location should be safely accessible by the cable.
3.2. CONNECTING TO THE ANTENNA
After installing your Antenna system, connect the coaxial cable from LNB of your
antenna to "DISH IN" terminal marked at the rear of the receiver.
All cable connectors should be finger tightened; do not use any kind of wrench on
cable over connectors.
The cable should be 75 impedance coaxial twisted at the end with an "F" type
connector.
3.3. CONNECTING TO EXTERNAL DEVICES
1) CONNECTING TO THE TV
After installing your antenna system, connect the coaxial cable.
To connect the receiver with your television, you can follow methods;
Through RF cable, RCA cable, COMPONENT cable and S-Video cable.
Connect the RF cable to the terminal marked "OUT TO TV" at the rear panel of the
receiver and its other end to the TV RF input socket.
2) CONNECTING EXTERNAL Hi-Fi AUDIO SYSTEM
To connect any external Audio Hi-Fi system, the receiver is provided with two RCA
connectors at the back of the receiver, marked with "L" and "R" respectively to
connect the left and right audio.
3) CONNECTING TO THE OTHER SATELLITE RECEIVER
Connect the satellite antenna cable to the "DISH IN" socket on the receiver. With
other connector, connect the "LOOP OUT" socket on the receiver to the "DISH IN"
socket of the other receiver.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vs pro

Table of Contents