Table of Contents
Advertisement
General Features
2. GENERAL FEATURES
Fully MPEG-2 & DVB Compliant
2 Tuners
Time-shifting
MP3(MPEG-1 Layer3) decoding
Powerful trick mode supported
Playback of the selected region repeatedly
USB supported for fast PC interface
Dual Decoding(PIP-Picture In Picture)
Dual Recording simultaneously
Support 2 Recording, 1 live at the same time
Input Frequency 950 ~2150MHz
Supports Electronic Program Guide (EPG), Picture In Graphic (PIG)
Supports SCPC & MCPC from C / Ku-band
Tuner Symbol Rate : 1 ~ 45MS/s
Fast Booting & Auto Scan
Quick Channel Changing
Max 6000 Channels (TV & Radio) Programmable
User Friendly 256 Colors OSD & Easy GUI
A lot of OSD Language supported
Favorite Channel List Editing
Master PIN Code Function & Parental Lock Function
100 Steps Volume Control
Automatic Detection of Forward Error Correction
Window based S/W Download Program Supported by RS232 Serial Port
Set to Set Download (Main Program, Channel Data)
4:3, 16:9, Letter Box
Various LNB Polarity Control
22KHz Switching Control
9 RCA Output for Video (Twin), Audio L/R(Twin), Component
S/PDIF Output for Digital Audio
S-VIDEO Output
RF-Modulator Output
Zoom function
Hardware based Blind Scan
DiSEqC 1.0, 1.2 and USALS (1.3) Compatible
Photo Album
6
How to Connect your Receiver
3. HOW TO CONNECT YOUR RECEIVER
Please DO NOT plug in the main power supply cord until you have finished
all the connections.
1) LOCATION OF THE RECEIVER
Your receiver should be placed under proper ventilation.
Don't put in completely enclosed cabinet that will restrict the flow of air, resulting overheating.
The location should be safeguarded from direct sunlight, excess moisture, rough handling or household
pets.
Avoid stacking other electronic components on the top of the receiver.
The location should be safely accessible by the cable.
2) CONNECTING THE RECEIVER WITH DISH SYSTEM
4
After installing your dish system, connect the coaxial cable from LNB of your dish antenna to "DISH
IN"terminal marked at the rear of the receiver.
All cable connectors should be finger tightened ; do not use any kind of wrench on the cable over
connectors.
The cable should be 75
impedance coaxial twisted at the end with a "F" type connector.
- Please check the followings and follow that according to your dish system type.
7
Advertisement
Table of Contents
