System Set-Up; Installation Wizard - ViewSat VSPRO User Manual

- - - -
SYSTEM SET SYSTEM SET SYSTEM SET SYSTEM SET UP UP UP UP
4. SYSTEM SET- UP

4.1. INSTALLATION WIZARD

When powering on your receiver for the first time, the installation Wizard will
starts automatically.
Please follow the installation wizard. This will assist you to complete the set-up
process. Without this process, the receiver will not work properly.
* Press the MENU key to return to the previous menu, while running the Installation
Wizard.
11
4.1.1. Select Language
Select a language by using the left/right keys
( ) and up/down keys ( ) .
◀ ∙ ▶ ▲ · ▼
Press OK key to save the selected language as
a default language.
This will also change the language for the
menu.
* Yellow: Reset to settings from Factory
* Blue: Checking Receiver version
4.1.2. Time Setting
Set Mode, Date, GMT Offset, Time and
Daylight-saving by using the left/right keys
( ) and up/down keys ( ) .
◀ ∙ ▶ ▲ · ▼
* Green: Go to the Next Step
4.1.3. Select Satellite
Select the appropriate Satellites from the
list by using the up/down keys ( ) and ok
▲ · ▼
key.
* Green: Go to the Next Step
4.1.4. Antenna Setting
Set up the configurations on each satellites by
using the left/right ( ) and up/down keys
◀ ∙ ▶
( ) .
▲ · ▼
OK key will guide you to a list of options or the
sub-menu.
After the configuration, move to the Channel
Search menu by pushing the green key or
select the channel search button.
(For the specific information, refer to the
7.2.INSTALLATION).
* Green: Go to the Next Step
* Yellow: Motor Setting
4.1.5. Channel Search
Select a mode; Auto, Manual or Advanced by
using the left/right ( ) and up/down keys (
◀ ∙ ▶ ▲ · ▼
(Recommendation: Auto).
After the configuration, push the red key.
(For the specific information, refer to the
7.2. INSTALLATION).
* Green: Go to the Next Step
* Blue : Start Blind Scan.
12
) .