Related Manuals for ViewSat VS2000
Summary of Contents for ViewSat VS2000
- Page 1 User’s Manual Free To Air VS2000...
- Page 2 Table of Contents 1. SAFETY PRECAUTIONS 2. GENERAL FEATURES 3. HOW TO CONNECT YOUR RECEIVER 4. HARDWARE DESCRIPTION 5. SYSTEM SET-UP 6. MENU OPERATION 7. TROUBLE SHOOTING 8. TECHNICAL SPECIFICATIONS 9. PROGRAMING THE REMOTE CONTROL...
- Page 3 Shock Hazard Marking and Associated Graphical Symbols Explanation of Safety Related Symbols The main socket-outlet for connecting mains plug shall be accessibly close to this apparatus This device complies with part 15 of the FCC rules. Operation is subject to the following conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference...
-
Page 4: S-Video Output
- 5 Keys on the Front Panel (Power On/Off, Channel Up/Down, Volume Up/Down) - Various LNB Polarity Control �22KHz Switching Control - 6 RCA Output for Video, Audio L/R, Component - S/PDIF Output for Digital Audio - S-VIDEO Output - RF-Modulator Output... -
Page 5: Satellite Antenna
The cable should be 75Ϊ impedence coaxial twisted at the end with a “F” type connector. To connect the receiver with your television, you can follow three method ; through RF cable, RCA cable, COMPONENT cable and S-Video cable. Connect the RF cable to the terminal marked “TV OUT” at the rear panel of the receiver and its other end to the TV RF input socket. - Page 6 : This port is for the connection to the extenal Hifi system which has a optical S/PDIF input interface. ): These RCA connectors are used to connect any external video and audio. : This is used to connect your local RF channels to your TV through Loop.
- Page 7 1) POWER : This is used to switch the receiver to ON/STANDBY mode. 2) MUTE : This key is used to toggle between normal and muted audio. 3) 0-9 NUMERIC KEYS : These keys are used to enter numeric values and to select the channel directly by entering its number.
- Page 8 You can automatically detect and save all TV and Radio channels of a satellite as follows : ■ Connect the receiver to all peripheral devices. � ■ Turn on the power of the receiver and other devices. � ■ Select Main Menu/Installation / Antenna Setup using CH ▲∙▼...
- Page 9 The main menu is classified into five sub menus which will carry out the various operation individually. After installing your dish system and receiver with appropriate connectors, plug in the AC main power and turn on the receiver. Press the MENU key of the RCU. You will see the “Main Menu”...
- Page 10 You can edit the favorite channel list, such as add/delete a channel or move its position, which facilitates you to easily find your favorite channel from the favorite channel list. The favorite channel is classified into one of 8 favorite categories depending on its genre. Select “Edit Favorite”...
- Page 11 “Installation” menu helps you to setup a variety of parameters necessary for receiving signal, add new service, upgrade the new software and reset the channel data. Select “Installation” menu in main menu, and you will be asked to enter your PIN code. You can find the following “Installation”...
- Page 12 -Please go to Antenna Setup and select USALS from motor. -Press F1 then Pop-up will be appeared. -Press arrow button to write Longitude -Press arrow button to write Latitude, then OK to work. It will be more convenient to use “Channel Scan” procedure when you want to search channel for a specified transponder offered from the satellite.
- Page 13 This function prevents children or unauthorized persons from watching programs. Also you can change PIN(Personal Identification Number) code. Select “Parental Control”menu in “Ins menu, and the following screen will be displayed. To lock receiver, select “Receiver Lock” in the “Parental Control” menu and change it to “On” mode using the “left/right”...
- Page 14 This menu helps you to Set up video output mode, Ianguage, screen type and Select “System Settings” menu in main menu : You can choose either 4:3 or 16:9 according to the TV type. : You can select the transparency of the menu. : You can select the menu language.
- Page 15 When you press”GUIDE” key again, Daily Guide will be displayed. You can see all events for selected chanel. Press “AUDIO” key. Select the audio mode which you want using the “left / right” keys( Some programs are broadcasted with one or more alternative language soundtracks. You can select the preferred audio language for soundtrack using the “up/down”...
- Page 16 : You can select this to “Default” or “User” When “Mode” is “User” , you can change each color value. : If your receiver connected to TV by using “VIDEO” or “S-VIDEO” Connector , these items will change the color setting of TV screen.
- Page 17 : 4:3(Normal) & 16:9(Widescreen) : MPEG-1 ISO/IEC 11172-3 Layer I & II : Mono, Dual, Stereo, Joint Stero : 32, 44.1, 48 KHz : 2 RCA Cinch : 1 RCA Cinch : 1 S/PDIF(Optical) : 1 S-VIDEO : 3 RCA Cinch...
- Page 19 Brand List for TV Brand List for TV...