Trouble Shooting - ViewSat VSPRO User Manual

Digital satellite receiver
Table of Contents

Advertisement

9.4.3. Repeat
You can watch a certain defined section repeatedly.
1) In Playback, push
key to set a starting point of section to repeat.
2) Move the section by using
&
3) Push
key to set the ending point of section to repeat.
* For canceling the repeat, push
key once more.
9.4.4. Fast Forward
Fast forward during playback is available. Also see 9.4.8. Drag Forward.
1) In Playback, push
key.
2) In order to increase playback speed, push
3) For returning to normal speed, push
* 4 steps of speed are available for Fast forward.
9.4.5. Fast Rewind
Fast rewind is available during playback. Please also see 9.4.9. Drag Backward.
1) In Playback, push
key.
2) In order to increase rewind speed, push
3) For returning to the normal speed, push
* 5 steps of speed are available for Fast rewind.
9.4.6. Slow Motion
For slow motion playback,
1) In playback, push
key.
2) For returning to normal speed, push
* Two steps of speed are available for Slow motion.
9.4.7. Pause
To pause the screen, push
key.
9.4.8. Drag Forward
You can move fast forward while pushing the
9.4.9. Drag Backward
You can move fast backward while pushing the
41
key.
key several times.
key.
key several times.
key.
key.
key. .
key.

10. TROUBLE SHOOTING

Problem
About the Receiver
-
Does not display LED on the
Connect the power cord to the power outlet
front panel or the receiver has
properly.
no power
-
No pictures on the screen
Check if the receiver is in standby mode.
-
Check if the video output port is firmly
connected to the TV.
-
Check if you have selected the correct channel
or video output on your TV.
-
No sound
Connect audio cords properly.
-
Check volume level of the TV.
-
Press
-
Remote
Control
does
not
Point remote control directly towards the
operate
receiver.
-
Check and replace batteries.
-
Poor picture quality
Check the signal strength in the Channel
Search menu. If this is low, try to adjust the
alignment of your antenna.
-
Frequent Rebooting after
Turn on after removing the signal cable from
Power-on
LNB:
-
If the rebooting does not occur; check the LNB!
(possible cause is LNB short-circuit)
-
Abnormal operation when two
Turn off one of the two STBs.
STBs are connected by
"LOOP OUT"
On - Screen Error Messages
-
Connect the antenna cable properly.
Searching Signal
-
Check the signal strength in the Channel
search menu.
TROUBLE SHOOTING
TROUB
TROUB
TROUB
LE SHOOTING
LE SHOOTING
LE SHOOTING
Solution
key.
42

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vs pro

Table of Contents