Installation - ViewSat VS2000 ULTRA User Manual

You can automatically detect and save all TV and Radio channels
of a satellite as follows :
�
�
�
�
■ Connect the receiver to all peripheral devices.
■ Turn on the power of the receiver and other
devices.
■ Select Main Menu/Installation / Antenna Setup
using CH ▲∙▼ & OK keys.
■ Select the satellite which you want to search
using VOL ◀∙▶ keys.
■ Insert all information of your antenna.
■ Press OK key, and the receiver will automatically
search for all TV/Radio channels from a satellite.
You can automatically search and save all TV and Radio channels of
a transponder as follows :
�
�
■ Select Menu/Installation/ Channel Scan.
■ Select the satellite which you want to search.
■ Insert all information of your antenna.
■ Select the transponder from transponder list
which you want to search.
If you cannot find it from transponder list, you
should insert all the transponder information
(i.e., Frequency, Symbol Rate, Polarity and FEC).
■ Press OK key, and the receiver will automatically
search for all channels contained in the selected
transponder.