User Setting - ViewSat VS2000 ULTRA User Manual

The main menu is classified into several sub menus which will carry out the
various operation individually.
After installing your dish system and receiver with appropriate connectors, plug in the AC main
power and turn on the receiver.
Press the MENU key of the RCU. You will see the
"Main Menu" on the TV screen as follow.
You can move into the desired submenu using the
"up/down" keys (▲∙▼) or numeric keys.
Press "OK" key to confirm your selection. If the "Main
Menu" is locked, note that you should enter the PIN
code in order to move into the corresponding submenu
in case of "Channel Organization" menu, " User
Setting" menu and "Installation" menu.
The default factory PIN code is "0000" .
Press the "menu" key or "exit" key to return to previous
menu.
"Installation" menu helps you to setup a variety of
parameters necessary for receiving signal, and add
new service.
Select "Installation" menu in main menu, and you
will be asked to enter your PIN code.
You can find the following "Installation" screen by
entering it.