ViewSat VS2000 ULTRA User Manual page 17

On the live TV screen or paused TV screen, you can magnify some region of TV screen.
Press "F4" key and the ZOOM box will be display.
You can use following keys.
- Up/Down/Left/Right keys ( ▲∙▼,◀∙▶ ) : Move the ZOOM box
▲ ▲
- Page Up/Page Down keys ( , ) : Increase or decrease the ZOOM box
▲ ▲
- OK key ( ) : Watch the ZOOM box to full screen or return to ZOOM box
- Exit key ( ) : Return to the live screen
You can use the Multi-picture Function using F1 key.
You can watch four, six or nine pictures at the same
time using this function. And select the number of
pictures using (
you can see the Multi-Picture Screen. Also you can
select the channel using(
key in the Multi-picture Screen. The channel of your
selection is only live signal when you selected one
channel of the several channels. The channels of
which is not selected are just the pictures.
) keys and press OK. After that,
▲,▼
) keys and OK
◀,▶ ▲,▼
You can adjust the color seting to take the enhenced
TV screen. Press "COLOR (F2 , TEXT)" key then
below screen will display.
: You can select this to "Default" or "User"
When "Mode" is "User" , you can change each color value.
: If your receiver connected to TV by using "VIDEO" or "S-VIDEO"
Connector , these items will change the color setting of TV
screen.
: If your receiver connected to TV by using "Component cable"
"(Y-Pb-Pr)" , these three items will change the color setting of TV
screen.These options are for XTREME model only.