Troubleshooting - Dymo LabelManager 150 User Manual

LM150 WEUdef.qxd

Troubleshooting

Review the following possible solutions if you encounter a problem while using your printer.
Problem/Error Message
No DISPLAY
Poor Print Quality
Poor Cutter Performance
Printing...
! Too many lines
Exceeded maximum number of lines allowed
!
Too many characters
Exceeded maximum number of characters in buffer
! Insert Tape Cassette
Tape cassette missing or empty
! Battery low
Batteries almost discharged
!
Tape Jam
Motor is stalled due to tape jam
Set
Fixed-length label is selected and the length
necessary to print the label exceeds the selected length. length necessary to fit the text. Do one of the
If you still need assistance, contact DYMO Customer Support for your country. The Warranty
booklet includes a list of contact numbers for each country.
23-09-2003 16:07 Pagina 9
Solution
• Ensure the printer is turned on.
• Replace discharged batteries.
• Replace discharged batteries.
• Ensure tape cassette is installed properly.
• Clean the print head.
• Replace the tape cassette.
Clean the cutter blade.
See Caring for your labelmaker.
No action required. Message will disappear once
the printing operation is finished.
Change layout of label or tape size.
Delete some or all of the buffer text.
Insert a new tape cassette.
Replace batteries or connect DC power adapter.
Remove jammed tape and replace tape cassette.
Following this message, a fixed-length value is
displayed which indicates the minimum label
following:
• Adjust the fixed-length label setting
appropriately,
or
• Select a narrower font size.
9