Table of Contents
Advertisement
Install Guide
what is included
Control Module
6-Pin Main H1 Harness
6-Pin H2 Secondary Harness
Heavy Gauge Wires
Crash code card
Combination Momentary Switch and LED
Hood Pin Switch
Hardware Kit
Additional parts may be required (such as relays or bypass).
installation tools
Digital Multi-Meter
Drill
1
/
Drill Bit (for hood pin switch)
4
Screwdrivers (Phillips and Flathead)
Wire Stripper
Solder Iron
Electrical Tape
Pliers
Crimping Tool
note: The installation tools listed above may be
optional and those required will vary depending on
your vehicle.
© 2006 Directed Electronics
3
Advertisement
Table of Contents
