Table of Contents
Advertisement
Step 5, Programming
Programming System Settings
Many of the features and operations of this system can be changed
to suit most of today's vehicle electrical systems. The program-
ming routine and feature menus that follow will allow making the
changes required for most vehicle installations.
System programming routine:
Accessing a Menu:
1.
Turn the ignition ON and then OFF in less than 5 seconds
2.
Within 3 seconds Press/Hold the Momentary Switch
3.
After 2 seconds the LED will flash once and Horn will
pulse once and repeat.
4.
Release the Momentary Switch to access the menu. The
LED and Horn outputs will cease.
Accessing a Feature Location:
1.
Press and release (do not hold) the Momentary Switch
the same number of times as the feature location to be
accessed. See the Feature Chart for locations.
2.
After 2 seconds the LED will flash (the number of flashes
will match with the feature location) to confirm the
feature location. It will flash/pause and repeat until the
feature is changed or programming is exited.
3.
Pulse the Red/White activation input wire. Each pulse
will toggle through each of the available options. The
LED and Horn outputs will pulse to indicate the selected
option.
© 2006 Directed Electronics
29
Advertisement
Table of Contents
