Directed Electronics AutoCommand 25622 Owner's Installation Manual page 37

after an ignition input is sensed and cease output 1
second after the ignition input ceases.
2. LightYourWay: The output will activate for 25 seconds
immediately after the ignition input ceases.
11. Start Chirps: Selects if the "Blue" Horn output wire will pulse
when activating Remote Starter.
1. On: The Horn output will pulse 1 time at the beginning
of Remote Start
2. Off: The Horn output WILL NOT pulse at the beginning
of Remote Start
12. NA: A feature is Not Available for this Location
13. Reset All Options: Pulse the activation input wire when this
Feature Location is accessed will "Reset All Options" to their
default setting.
34
© 2006 Directed Electronics