Directed Electronics AutoCommand 25622 Owner's Installation Manual page 33

a. Option 1: The LED will turn ON and the Horn will pulse
once.
b. Option 2-4: The LED will flash and the Horn will pulse
2-4 times to indicate the option and the LED will
continue to flash to indicate the option.
Return to the beginning of the Menu:
To return to the beginning of the menu at any time, press and hold
the Momentary Switch for 2 seconds.
Advance to different feature location:
To advance to a new location within the same menu press/release
the Momentary Switch the same number of times as the difference
between the feature locations.
example! to advance from feature location 2 to feature
location 8 press/release (do not hold) the Momentary
switch 6 times, after 2 seconds the LED will flash 8
times to indicate the newly accessed feature location.
Exiting Feature programming:
The following will cause the system to exit programming and is
indicated by 5 short chirps of the Horn output.
a. More than 15 seconds lapses between inputs by
Momentary switch or activation input
b. The ignition is turned on
30
© 2006 Directed Electronics