Table of Contents
Advertisement
OPERATING YOUR SYSTEMS FEATURES
The following Remote Start activation descriptions assume
connection to the vehicle's factory keyless entry system or an
aftermarket alarm. Your installer will inform you of the correct
action for activating the Remote Starter.
Remote Start Features
Remote Start allows you to remotely start and run your vehicle for
a programmed period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the
vehicle with the climate control system. If interior heating or
cooling is desired, the climate controls must be preset, and the fan
blower must be set to the desired level prior to remote starting the
vehicle.
Remote Start operation is completely disabled by placing the
system into the Valet Mode. The Remote Start, Quickstop, Daily
Start and Vacation Mode features will not operate when in the
Valet Mode.
Remote Start the vehicle:
➤
Pulse the activation input wire two times using you
keyless entry or alarm transmitter.
➤
The parking lights will flash once and the Horn will chirp
once to confirm that the vehicle will attempt to start.
➤
The engine will start a few seconds after the parking
lights flash.
➤
Once started, the lights will flash and it will run for the
programmed period of time
© 2006 Directed Electronics
45
Advertisement
Table of Contents
