Accessories - RME Audio Hammerfall RPM User Manual

21. Accessories

RME offers several optional components, further increasing the flexibility and usability of the
HDSP system. Additionally parts of the HDSP system, like the special CardBus cable and the
switching power supply, are available seperately.
Part Number
36000 19", 1UH Universal rack holder
This 19" rack holder has holes for Digiface and RPM. Two units can be installed side by side in
any combination. The rack holder also includes holes for nearly all 19" half-rack units from
other manufacturers.
36001 Firewire cable IEE1394 6M/6M, 1 m (3.3 ft)
36002 Firewire cable IEE1394 6M/6M, 3 m (9.9 ft)
36005 Firewire cable IEE1394 6M/6M, 5 m (16.4 ft)
36010 Firewire cable IEE1394 6M/6M, 10 m (32.8 ft)
Firewire cable for the HDSP system, both sides 6-pin male. Cable longer than 16 ft is not
allowed for Firewire, therfore hard to get in computer shops. However the HDSP system can
operates flawlessly even with a cable length of up to 50ft (15 m).
36081 RME Firewire cable for CardBus 15/6M, 5 m (16.4 ft)
36082 RME Firewire cable for CardBus 15/6M, 1 m (3.3 ft)
Special cable 15-pin close Lan coded to 6-pin male, for RME CardBus card.
37011 Power supply for HDSP CardBus card
Robust and light weigth switching power supply, 100V-240V AC, 12V 1.25 A DC.
Description
User's Guide HDSP System RPM © RME
35