7.11 Speaker
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the front bezel
4. Rotate the drive cage to its upright position.
5. Disconnect the speaker wire from the system board.
6. Remove the two screws that secure the speaker to the chassis 1.
✎
You may need a stubby Torx T15 screwdriver to access the screws.
7. Remove the speaker 2.
To install the speaker, reverse the removal procedures.
Service Reference Guide, dx5150
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
(Section 7.1, "Preparation for
(Section 7.3, "Computer Access
(Section 7.4, "Front
Bezel,").
361685-001
Disassembly").
Panel").
7–23