Post Diagnostic Front Panel Leds And Audible Codes - HP Dx5150 - Compaq Business Desktop Reference Manual

Hp business desktop dx5150 series service reference guide, 1st edition
Hide thumbs Also See for Dx5150 - Compaq Business Desktop:
Table of Contents

Advertisement

POST Error Messages

POST Diagnostic Front Panel LEDs and Audible Codes

This section covers the front panel LED codes as well as the audible codes that may occur before
or during POST that do not necessarily have an error code or text message associated with them.
If you see flashing LEDs on a PS/2 keyboard, look for flashing LEDs on the front panel of the
computer and refer to the following table to determine the front panel LED codes.
Recommended actions in the following table are listed in the order in which they should be
performed.
Diagnostic Front Panel LEDs and Audible Codes
Activity
Green Power LED
On.
Green Power LED
flashes every two
seconds. The
Power LED will
continue flashing
until the problem is
resolved.
Red Power LED
flashes two times,
once every second,
followed by a
two-second pause.
The Power LED will
continue flashing
until the problem is
resolved. (Pertains
to CPU fan only)
C–4
Possible
Beeps
Cause
None
Computer on.
None
Computer in
Suspend to
RAM mode
(some models
only) or
normal
Suspend
mode.
None
Processor
thermal
protection
activated:
A fan may be
blocked or not
turning.
OR
The
heatsink/fan
assembly is
not properly
attached to
the processor.
361685-001
Recommended Action
None
None required. Press any key or move
the mouse to wake the computer.
1. Ensure that the computer air vents
are not blocked and the processor
cooling fan is running. Leave a
4-inch (10.2-cm) clearance at the
back of the system unit and above
the monitor to permit the required
airflow.
2. Open hood, press power button,
and see if the processor fan spins. If
the processor fan is not spinning,
make sure the fan's cable is plugged
onto the system board header.
Ensure the fan is fully/properly
seated or installed.
3. If fan is plugged in and seated
properly, but is not spinning, then
replace processor fan.
4. Reseat processor heatsink and verify
that the fan assembly is properly
attached.
Service Reference Guide, dx5150

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx5150 series

Table of Contents