HP Dx5150 - Compaq Business Desktop Reference Manual page 19

Computer Setup (Continued)
Heading Option
Power After AC Power Loss
Management
Setup
(continued)
PowerOn by PCI Card
AMD Cool'n'Quiet
RTC Alarm Resume
Date (of Month)
Resume Time (hh:mm:ss)
PnP/PCI Reset Configuration Data
Configurations
Resources Controlled By
IRQ Resources
• IRQ-3 assigned to
• IRQ-4 assigned to
• IRQ-5 assigned to
• IRQ-7 assigned to
• IRQ-10 assigned to
• IRQ-11assigned to
• IRQ-12assigned to
• IRQ-14assigned to
• IRQ-15assigned to
Assign IRQ for VGA
Assign IRQ for USB
✎
Support for specific Computer Setup options may vary depending on the hardware configuration.
Service Reference Guide, dx5150
Description
Allows you to select:
• Last State
• On
• Off
Enables/disables capability of powering on by PCI card.
Allows you to set the AMD Cool'n'Quiet to auto or to
disable it.
Enables/disables resumption of RTC alarm.
If RTC Alarm Resume is enabled, allows you to select the
day of the month for resumption of RTC alarm.
If RTC Alarm Resume is enabled, allows you to select
what time the RTC alarm will resume.
Enables/disables automatic reconfiguration.
Default is Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup,
if you have installed a new add-on and the system
reconfiguration has caused such a serious conflict that the
OS cannot boot.
Allows you to select whether resources are controlled
automatically or manually.
BIOS can automatically configure all the boot and
Plug-and-Play-compatible devices. If you choose Auto,
you cannot select IRQ DMA and memory base address
fields, since BIOS automatically assigns them.
When resources are controlled manually, allows you to
assign each system interrupt a type, depending on the
type of device using the interrupt.
Legacy ISA for devices compliant with the original PC AT
bus specification, PCI/ISA PnP for devices compliant with
the Plug and Play standard whether designed for PCI or
ISA bus architecture.
Enables/disables capability of assigning IRQ for VGA.
Enables/disables capability of assigning IRQ for USB.
361685-001
Setup Utilities and Diagnostics Features
2–7