Serial and Parallel ATA Drive Guidelines and Features
File
System
FAT 32
ATA
NTFS
ATA
4.6 SATA BIOS
Windows 2000 and XP
Enhanced Mode (default BIOS Setting)
—Separate IDE controller
• PATA Controller in Legacy Mode
- Device 0 is accessible as Device 0 of
PATA controller's Primary Channel
- Device 1 is accessible as Device 1 of
PATA controller's Primary Channel
• SATA Controller in Native Mode
- SATA 0 is accessible as Device 0 of
SATA controller's Primary Channel
- SATA 1 is accessible as Device 0 of
SATA controller's Secondary Channel
SATA 2 is accessible as Device 1 of SATA
controller's Primary Channel
- SATA 3 is accessible as Device 1 of
SATA controller's Secondary Channel
4.6.1 Legacy Mode
Use Legacy mode to access devices attached to the embedded IDE controller. The channel
requires two fixed I/O address ranges and an IRQ for each.
❏
Command block: 1F0h - 1F7h
❏
Control block: 3F6h
❏
IRQ: 14
4–6
Drive/Partition Capacity Limits
Controller
Type
Windows 2000/ XP
Windows NT/2000/XP
361685-001
Operating System
Windows 9x, NT, and Linux
Compatibility Mode (non-default BIOS Setting)
—Combined IDE controller
• PATA Controller in Legacy Mode
- Device 0 is accessible as Device 0 of the
combined controller's Secondary Channel
- Device 1 is accessible as Device 1 of the
combined controller's Secondary Channel
• SATA Controller in Legacy Mode
- SATA 0 is accessible as Device 0 of the
combined controller's Primary Channel
- SATA 1 is inaccessible
- SATA 2 is accessible as device 1 of the
combined controller's Primary Channel
- SATA 3 is inaccessible
Maximum Size
Partition
Drive
32 GB
128 PB
2 TB
128 PB
Service Reference Guide, dx5150